T51 button bit retrac drill bits

T51 button bit retrac drill bits

Underground production and long hole drilling
T51 Drill string

The difference between a guide tube and a guide rod is the level of hole straightness needed at the quarry or mine.
Where there are challenging rock formations with a higher liability of hole deviation, a guide tube is the best solution.

T51 button bit retrac drill bits

T51 Drill bits

T51 button bit retrac drill bits

Please note: that all button bits are manufactured over-sized 0,5-2,5 mm (it depends on the size of bit and buttons), meaning that for example a 45,0 mm bit is at least 45,5 mm.
as new, or the size of a 140,0 mm new bit can be 141,5 mm to 142,5 mm (it depends on the model and type of bit). This is done because of the fast initial wear on button bits. It is important to consider that the drilled hole could vary in size due to drilling conditions, drilling practices and ground formation.

T51 button bit retrac drill bits

T51 Drill bits

Drill bits
Product no. Product code Front shape Bit diameter Retrac No. of buttons Buttons x button diameter Buttons angle Flushing hole Indexing template for grinding mm inch mm gauge mm center Gauge Center Side Center
Spherical
90029733 137-6076-21,57-20 Power Face 76 3″ No 13 8×12,7 5×11 35° – – 4 87003953
90029731 137-6083-44,57-20 Power Face 83 3²⁄₇” Yes 13 12×11 1×9 35° – 2 4 87004432
90029402 137-5089-44,57-20 Flat Face 89 3½” Yes 16 9×11 7×11 35° – – 3 87004434
90029415 137-6089-21-44,57-20 Power Face 89 3½” Yes 13 8×12,7 5×12,7 35° – 2 4 87004432
90029417 137-5089,57-20 Flat Face 89 3½” No 16 9×11 7×11 35° – – 3 87004434
90029419 137-6089-21,57-20 Power Face 89 3½” No 13 8×12,7 5×12,7 35° – 2 4 87004432
90029057 137-6102-44,49-12 Drop Center 102 4″ Yes 14 8×12,7 6×12,7 35° – – 4 87003952
90029400 137-6102-21,57-20 Power Face 102 4″ No 13 8×15,8 5×12,7 35° – 2 4 87004435
90029423 137-6102-21-44,57-20 Power Face 102 4″ Yes 13 8×15,8 5×12,7 35° – 2 4 87004435
90029424 137-5102-44,57-20 Flat Face 102 4″ Yes 16 9×14,5 7×12,7 35° – – 3 87004775
90029425 137-5102,57-20 Flat Face 102 4″ No 16 9×14,5 7×12,7 35° – – 3 87004775
90029428 137-6115-21-44,57-20 Power Face 115 4½” Yes 13 8×15,8 5×14,5 35° – 2 4 87003952
90029429 137-5115-44,57-20 Flat Face 115 4½” Yes 16 9×14,5 7×14,5 35° – – 3 87004775
90029432 137-5115,57-20 Flat Face 115 4½” No 16 9×14,5 7×14,5 35° – – 3 87004775
90029438 137-6115-21,57-20 Power Face 115 4½” No 13 8×15,8 5×14,5 35° – 2 4 87003952
90029427 137-6127-21,57-20 Power Face 127 5″ No 17 8×15,8 4×15,8, 5×11 35° – 2 4 87003953
90029437 137-6127-21-44,57-20 Power Face 127 5″ Yes 17 8×15,8 4×15,8, 5×11 35° – 2 4 87003953
90029439 137-5127-44,57-20 Flat Face 127 5″ Yes 19 9×14,5 10×14,5 35° – – 3 87004775
90029444 137-5127,57-20 Flat Face 127 5″ No 19 9×14,5 10×14,5 35° – – 3 87004775
90029735 137-6140-21,57-20 Power Face 140 5½” No 19 10×15,8 9×14,5 35° – – 5 87004571
90029736 137-6152-21,57-20 Power Face 152 6″ No 19 10×15,8 9×14,5 35° – – 5 87004572
90029766 137-5152-42-24,57-20 Dome bit 152 6″ No 20 18×14,5 2×14,5 35° – – 3 87004775
Trubbnos
90029414 137-6089-21-44-70,57-20 Power Face 89 3½” Yes 13 8×12,7 5×12,7 35° – 2 4 87004432
90029416 137-6089-44-70,57-20 Power Face 89 3½” Yes 13 8×12 5×12 35° – 2 4 87004432
90029418 137-6089-21-70,57-20 Power Face 89 3½” No 13 8×12,7 5×12,7 35° – 2 4 87004432
90029420 137-6089-70,57-20 Power Face 89 3½” No 13 8×12 5×12 35° – 2 4 87004432
90029917 137-5089-47-70,57-20 MRB 89 3½” No 14 8×12,7 4×12,7, 2×11 40° 20° 2 4 87004432
90029734 137-6092-44-70,57-20 Power Face 92 3⅝” Yes 13 8×12,7 5×12,7 35° – – 4 87003560
90029969 137-6095-44-70,57-20 Power Face 95 3¾” Yes 13 8×12,7 5×12,7 35° – 2 4 87003560
90029398 137-6102-70,57-20 Power Face 102 4″ No 13 8×14,5 5×12,7 35° – 2 4 87004435
90029399 137-6102-21-70,57-20 Power Face 102 4″ No 13 8×15,8 5×12,7 35° – 2 4 87004435
90029421 137-6102-44-70,57-20 Power Face 102 4″ Yes 13 8×14,5 5×12,7 35° – 2 4 87004435
90029422 137-6102-21-44-70,57-20 Power Face 102 4″ Yes 13 8×15,8 5×12,7 35° – 2 4 87004435
90029918 137-5102-47-70,57-20 MRB 102 4″ No 14 8×14,5 4×12,7, 2×11 40° 20° 2 4 87004432
90029401 137-6115-21-44-70,57-20 Power Face 115 4½” Yes 13 8×15,8 5×14,5 35° – 2 4 87003952
90029426 137-6115-44-70,57-20 Power Face 115 4½” Yes 13 8×14,5 5×14,5 35° – 2 4 87003952
90029434 137-6115-21-70,57-20 Power Face 115 4½” No 13 8×15,8 5×14,5 35° – 2 4 87003952
90029436 137-6115-70,57-20 Power Face 115 4½” No 13 8×14,5 5×14,5 35° – 2 4 87003952
90029430 137-6127-70,57-20 Power Face 127 5″ No 17 8×14,5 4×14,5, 5×11 35° – 2 4 87003953
90029431 137-6127-21-70,57-20 Power Face 127 5″ No 17 8×15,8 4×15,8, 5×11 35° – 2 4 87003953
90029433 137-6127-21-44-70,57-20 Power Face 127 5″ Yes 17 8×15,8 4×15,8, 5×11 35° – 2 4 87003953
90029435 137-6127-44-70,57-20 Power Face 127 5″ Yes 17 8×14,5 4×14,5, 5×11 35° – 2 4 87003953

Tungsten carbide inserts

Use large-grain coarse-grained tungsten carbide, which has high wear resistance, impact resistance and thermal stability

Shank body

High-quality alloy steel is selected, and the stable heat treatment process makes the tooth body wear-resistant and tough

Brazing process

Through special welding process, the strength of pick welding is increased, the impact resistance is improved, and the carbide tip is not easy to fall off

Shank reinforcement

Through laser cladding, powder metallurgy technology and other technologies to protect the head of the tooth body, reduce the wear rate and extend the service life

Application

According to different applications ,King Kong Drils offers three major types round shank picks :  rotary drilling picks,road header picks,road milling picks.Mainly used for coal mining and tunnel,tunnels,ground trenching and other excavation works,   and mainly equipped with shearer,boring machine,milling machines and other equipment.  Applied to all kinds of soft and hard soil, rock and concrete layer.

Plant show

How can we keep the quality stable?

1. Raw material selected
2. Advanced design and production equipment
3. Skilled technician
4. Finished Product testing
5. Customers’ feedback to change design and materialas.

What we do?

We specialized in six industrial fields and professional supply over 146 kind product verified in over 400 specifications.As the Superhard composite material department,our product range including Earth drilling tools,PDC cutter,PDC drill bit,Holder and blade of Chain saw and other superhard composite material tools.

Technology advantage

We were awarded 2 National Gold Prizes and 128 Scientific Promotion Prizes and we have got 76 patents in recent years.

FAQ

1.what can you buy from us?
Air Compressor,Drilling Rig,Drill Bit,Spare Parts

2.How can I make payment?
A: You can pay directly online on Alibaba with credit card, or TT, Western Union, LC etc.

3.How is the shipment? How long does it take?
A: For large quantity or heavy products, we ship by sea shipping or land shipping. Shipping efficiency depends on country and city you want to ship to. For small and delicate products, we ship by DHL, UPS, Fedex or TNT.You can also appoint shipping method you like before we ship.

4.How is your quality control?
A: We have our own experienced QC.There will be strict inspection and testing for every order before shipping out.

5.Do you have any certificate of authorization?
A: Our machinery is CE certified.

KINGKONGDRILL Co., Ltd has always valued end users’ first hand feedback to helps us in delivering products that suits for their own use.

We appreciate feedback from customers and it is our mission to continually excel ourselves in manufacturing quality products with the relentless efforts we put in.

For the pursuit of long time business cooperation, we don’t make cheap quality and offer cheap prices to lure business.

To KINGKONGDRILL Co., Ltd, quality comes first. For quality guarantee, we conduct strict inspections throughout the production and after the production.

We are capable of customizing for your ground condition: we can select proper tungsten carbide tips for your different hard rock condition.

In the passion we carry, our cutting teeth will help our customers to make more money when using our teeth over bigger companies that don’t know or care about individual customer requirement.

Please contact Bruce if you need any rock drilling tools or Mining picks.

Bruce

Email: info@kingkongdrillsltd.com

Whatsapp/Phone:+8617638571343

www.chinadrillingtools.cn

www.kingkongdrillsltd.com

www.kingkongdrillslimited.com