Contact Us

Products

• T45 Rod adapter 236-4902-C-10 (31/03/2023)
• T45 90515671 Rod adapter (31/03/2023)
• T45 Rnd45 D65mm Speedrod (31/03/2023)
• T45 Epiroc Bits Bench Drilling (28/03/2023)
• T38 DØ55 Couplings Bench drilling (20/03/2023)
• T38 Rnd56-64 TDS Guide rod (20/03/2023)
• 90515575 T38 Rnd45 Guide rod (20/03/2023)
• T38 Rnd38 Hex32 Extension rod (20/03/2023)
• T38 Bench Drilling Bits Epiroc (17/03/2023)
• 90029246 T35 Speedrods (16/03/2023)
• 90029245 T35 Speedrods (16/03/2023)
• T35 Bench Drilling retrac bits (16/03/2023)
• ST68 Rnd87 Carburized Drill tubes (16/03/2023)
• ST68 Drill bits factory Epiroc (15/03/2023)
• ST58 Drill tubes with Fully carburized (15/03/2023)
• ST58 Button Drill bits factory price (15/03/2023)
• ET51 Rnd76mm Guide tubes (15/03/2023)
• T51 Guide tubes Drill tubes (15/03/2023)
• 90514708 T51 Rod adapter (15/03/2023)
• T51 round Rnd51 Speedrod (13/03/2023)
• T51 button bit retrac drill bits (13/03/2023)
• T45 thread round 64/76 Guide tubes (13/03/2023)
• 90514785 Guide rods 236-5143-MF-C (13/03/2023)
• 90513771 Guide rods 236-5137-MF-C (13/03/2023)
• 90515671 T45 thread Rod adapter (10/03/2023)
• T45 Rnd45 round Speedrods (08/03/2023)
• T45 Spherical Trubbnos Drill Button Bits (07/03/2023)
• T38 couplings with full bridge (07/03/2023)
• T38 Shank thread Round Guide tubes (07/03/2023)
• T38 Round 46 mm Guide rod (06/03/2023)
• T38 Shank thread round Speedrod (06/03/2023)
• T38 Shank thread Extension rods (06/03/2023)
• T38 buttons Drill Bits (06/03/2023)
• TC35 Shank thread Guide tubes (06/03/2023)
• TC35 Shank thread Speedrods (03/03/2023)
• TC35 button bits Drill bits (03/03/2023)
• 150mm Length R32 Couplings (03/03/2023)
• R32 Shank thread Guide tubes (03/03/2023)
• R32 (1¼") round speedrod (03/03/2023)
• R32 round rod Extension rods (03/03/2023)
• R32 Thread Pilot adapters (03/03/2023)
• R32 Reaming button bits (03/03/2023)
• R32 (1¼") Drill bits (02/03/2023)
• 90516019 Cross over adapter (02/03/2023)
• Thread R25 R32 couplings (02/03/2023)
• 90515746 Cross over coupling (02/03/2023)
• 6° Pilot adapter with insert (01/03/2023)
• Pilot rods-6˚taper angle (01/03/2023)
• 90000297 Pilot rods 6˚taper angle (01/03/2023)
• 90000296 Pilot rods 6˚taper angle (01/03/2023)
• 90510460 Drill Bit 6° taper angle (01/03/2023)
• 90510459 Drill Bit 6° taper angle (01/03/2023)
• 12˚ Taper angle Dome bits (24/02/2023)
• 11˚ Taper angle Dome bits (24/02/2023)
• 7˚ Taper angle Dome bits (24/02/2023)
• 11° H25 Tapered drifter rods (23/02/2023)
• 12 degree H28 Tapered drifter rod (23/02/2023)
• R28 Hex. 28 Tapered drifter rods (23/02/2023)
• R32 Hex. 25 Tapered drifter rods (23/02/2023)
• Hex. 25 mm Forged collar rods (22/02/2023)
• hex. 25 mm Tapered rods (22/02/2023)
• Hex.25mm Tapered Drill Bits (22/02/2023)
• Hex. 22 mm Tapered drifter rods (22/02/2023)
• H22mm Rubber collared rods (22/02/2023)
• Forged collar tapered rods (22/02/2023)
• H22 mm Drill bits (21/02/2023)
• 89mm T45 thread button bits made in China (17/11/2022)
• Dia 95mm Reaming Bit (15/11/2022)
• 12‘’IADC825 Tricone Rock Bit (11/11/2022)
• Secoroc RC 50 DTH hammer (08/11/2022)
• COP RC45 HD DTH-hammer (08/11/2022)
• COP RC45 Reverse Circulation DTH-hammer (08/11/2022)
• 165mm Reaming bit Series (07/11/2022)
• RE545 Reverse Circulation Hammer (07/11/2022)
• 36mm tapered button bit (04/11/2022)
• 57 DTH Hammer Bit Drilling Accessories (27/09/2022)
• 6 high air pressure DTH rock drill bit (27/09/2022)
• W Conventional drill rods (17/09/2022)
• B series reaming shell (17/09/2022)
• MLC WG WM Series reaming shell (17/09/2022)
• T series reaming shell (17/09/2022)
• B Series bit (17/09/2022)
• MLC WG WM Series drill bit (17/09/2022)
• T series drill bit (17/09/2022)
• accident handing tool (16/09/2022)
• Clamp (16/09/2022)
• Wreanch (16/09/2022)
• Hoist Plug (16/09/2022)
• BC2U Wireline coring overshot (16/09/2022)
• HCU wireline coring overshot (16/09/2022)
• 3m NCU wireline coring overshot (16/09/2022)
• 3m BCU wireline coring overshot (15/09/2022)
• 3m SC wireline coring overshot (15/09/2022)
• 3m PC Wireline coring overshot (09/09/2022)
• HC1 Wireline coring overshot (09/09/2022)
• NC wireline coring overshot (09/09/2022)
• BC Wireline coring overshot (09/09/2022)
• NC2U Wireline underground double tube core barrel (09/09/2022)
• BC2U Wireline underground double tube core barrel (09/09/2022)
• HCU wireline underground double tube core barrel (09/09/2022)
• NCU Wireline underground double tube core barrel (08/09/2022)
• BCU wireline undergrund core barrel (08/09/2022)
• C3 Series wireline double tube core barrel (08/09/2022)
• NC2 Thin wall wireline double tube core barrel (08/09/2022)
• BC2 Thin Wall Wireline double tube core barrel (08/09/2022)
• SC Wireline double tube core barrel (08/09/2022)
• PC Wireline Double tube core barrel (08/09/2022)
• HC wireline double tube core barrel (07/09/2022)
• NC Wireline double tube core barrel (07/09/2022)
• BC Wireline double tube core barrel (07/09/2022)
• 1.5m W WT Series Casing (06/09/2022)
• 3m W WT Series Casing (06/09/2022)
• W WT Series Casing (06/09/2022)
• HD Series Wireline Drill (06/09/2022)
• CR Series Wireline Drill Rod (06/09/2022)
• C Series Wireline Drill Rod (06/09/2022)
• C Series Reaming Shell (06/09/2022)
• C6 W Series Casing bit (05/09/2022)
• C Series rod shoe (05/09/2022)
• W Series Casing Shoe (05/09/2022)
• C Series Diamond bits (05/09/2022)
• S Diamond Core Drilling bits (05/09/2022)
• C12 R Series NC Exploration drill bits (05/09/2022)
• K Series NC exploration drill bit (05/09/2022)
• R32 Speedrods for long hole (26/08/2022)
• R32 Extension Rod for long hole (26/08/2022)
• R32 drill bits for long hole drilling (26/08/2022)
• 64mm Reaming bits (25/08/2022)
• T42 dirfter rod (25/08/2022)
• T42 Drill bits for drifting (25/08/2022)
• TC35 speedrods (25/08/2022)
• TC35 Drill bits for drifting (25/08/2022)
• R38 extension rod for drifting (25/08/2022)
• R38 Drill bit for drifting (25/08/2022)
• SR38 Speedrods (24/08/2022)
• SR38 Drill bits (24/08/2022)
• SR35 Speedrod for drifting (24/08/2022)
• SR35 Drifter rods (24/08/2022)
• SR35 Drill bits for drifting (24/08/2022)
• R32 Drifter rods (24/08/2022)
• R32 tapered drifter rods (24/08/2022)
• R32 Drilling bits for drifting (23/08/2022)
• SR32 Drifter rod for drifting (23/08/2022)
• SR32 Drilling bits for drifting (23/08/2022)
• R28 Drifter rods for drifting (23/08/2022)
• R28 Drill bits (23/08/2022)
• SR28 Speedrods for drifting (23/08/2022)
• SR28 Drifter rods (23/08/2022)
• SR28 Drilling bits (22/08/2022)
• R25 extension rods (22/08/2022)
• R25 Drifter rods (22/08/2022)
• R25 Drill bits (22/08/2022)
• SR32 Speedrods (22/08/2022)
• SR32 Drilling bits (22/08/2022)
• R32 Guide tubes (22/08/2022)
• R32 drifter rods (21/08/2022)
• R32 Speedrods (21/08/2022)
• R32 Extention rod (21/08/2022)
• R32 drill bits (21/08/2022)
• R28 Extension rod (21/08/2022)
• R28 drill bits (21/08/2022)
• SR28 Drifter rods (21/08/2022)
• SR28 speed rods (18/08/2022)
• H22mmTapered drifter speedrod (18/08/2022)
• SR28 shank end rods (18/08/2022)
• SR28 drill bit (18/08/2022)
• Pilot rods 6˚ taper angle (17/08/2022)
• Dome bits for reaming Taper angle 7˚, 11˚, 12 (17/08/2022)
• H25 159mm taper rod (17/08/2022)
• H25108mm taper rod (17/08/2022)
• Button bit – for 25 mm (1") hex. (17/08/2022)
• 11 angle taper rod H22*159mm (17/08/2022)
• 12° angle taper rod H22*108mm (17/08/2022)
• 11º taper angle rod H22*108 (16/08/2022)
• 7taper angle rod H22*108 (16/08/2022)
• 4º46' taper rod H22*108mm (16/08/2022)
• Button bits – For 22 mm (7/8") hex. Rod. 12° taper angle (16/08/2022)
• Drill bit – For 22 mm (7/8") hex. Rod. 11° taper angle. Short skirt. (16/08/2022)
• Button bit – For 22 mm (7/8") hex. Rod 7° taper angle (16/08/2022)
• Button bit for 22mm hex.rod 4'46'taper angle (16/08/2022)
• B67C Pneumatic Crushers (15/08/2022)
• Air Pick G07 (14/08/2022)
• Casing tubex overburden system (13/08/2022)
• Y24 Hand-hold rock drill (13/08/2022)
• YT28 Air-leg Rock Drill (13/08/2022)
• 26mm Twist drill rod for bolting (11/08/2022)
• H19mm drilling rod for bolting (11/08/2022)
• H19mm drilling bits for bolting (11/08/2022)
• 65mm Cutter teeth for foundation drilling tools (11/08/2022)
• 45mm Sleeves for pick tools (11/08/2022)
• Blocks for pick tools (11/08/2022)
• 41mm Flats and radials of Flats pick tools (11/08/2022)
• 20mm road milling tools (10/08/2022)
• 19mm thenching tools bits (10/08/2022)
• 38mm/30mm crusher pick tools (10/08/2022)
• 35mm conical pick tools (10/08/2022)
• 43mm/35mm Conical Mining Cutting Pick With Round Step Shank (10/08/2022)
• R32 cross-type bit for Rock tools (04/08/2022)
• R32 Retrac button bit (03/08/2022)
• COP44 DHD340 Series DTH drilling bit (01/08/2022)
• RC45 Reverse circulation hammers (28/07/2022)
• BR1 Medium air pressure DTH hammers(without foot valve) (28/07/2022)
• SD4 High air pressure DTH hammers with foot valve (25/07/2022)
• CIR90 series DTH drilling bit(low air pressure) (25/07/2022)
• DHD3.5 High air pressure DTH hammer without foot valve (25/07/2022)
• R32 Drill rod for bench drilling (22/07/2022)
• R38 Coupling (22/07/2022)
• R32 Drill bits for bench drilling (22/07/2022)
• 19mm Integral drill steels (21/07/2022)
• Cross-type bit for Tapered rock drilling tools (21/07/2022)
• 7degree Button Bit for tapered rock drilling tools (21/07/2022)
• 22mm Chisel bit integral drill steels (21/07/2022)
• 7degree Horseshoe chisel bit for tapered rod (21/07/2022)
• Drill bit for 22 mm hex. Rod 4°46' taper angle (16/06/2022)
• 217mm IADC Rotary Drilling Bits (29/05/2022)
• 20mm to 60mm for shank adapters (27/05/2022)
• T38-381mm shank adapter for VL140 (24/05/2022)
• R32-381mm shank adapter for VL140 (24/05/2022)
• R38 381mm shank adapter for VL140 (24/05/2022)
• T38-446mm shank adapter for VL140 (24/05/2022)
• T45-381mm shank adapter for VL140 (24/05/2022)
• T45-381mm shank adapter for VL140 Epiroc (20/05/2022)
• 70mm DTH BR2 shank COP 20 hammer (19/05/2022)
• 12 1/4 Rotary Tricone rock bit (18/05/2022)
• 9 7/8 IADC 517 TCI tricone bit (18/05/2022)
• Y50 Hand-hold Rock Drill (16/05/2022)
• Y24 Hand-hold Rock Drill (16/05/2022)
• Y20 Hand-hold Rock Drill (16/05/2022)
• Y24 Hand-hold Rock Drill (16/05/2022)
• YO20 Hand-hold Rock Drill (16/05/2022)
• YO18 Hand-hold Rock Drill (16/05/2022)
• Y28 Hand-hold Rock Drill (16/05/2022)
• 7655 Air-leg Rock Drill (16/05/2022)
• YT29A Air-leg Rock Drill (13/05/2022)
• YT24 Air-leg Rock Drill (13/05/2022)
• YT28 Air-leg Rock Drill (13/05/2022)
• c45/1045 carbon steel round bar (10/05/2022)
• aisi 4340 forged round bar (10/05/2022)
• AISI1022 hollow steel round bars (10/05/2022)
• B22 hex hollow steel drills rod (09/05/2022)
• H25 hollow hexagonal drill rod (08/05/2022)
• 40Cr China hollow rock drill rod (08/05/2022)
• R25 55SiMnMo Hex steel drill rod (07/05/2022)
• R52H38/32 Hexagon drill bit Round hollow steel (25/04/2022)
• H25R46 Hexagon drill bit hollow steel (25/04/2022)
• H22 R39 Hexagon drill bit hollow steel factory (25/04/2022)
• T38 64mm Thread button bits manufacturer (22/04/2022)
• H19R32Hexagon and round rock drill hollow steel supplier (21/04/2022)
• CIR110 Low Air Pressure DTH Bits (20/04/2022)
• 7/11/12 degree tapered pentagon socket and bit set (10/03/2022)
• Tapered degree 12 Hex 22mm 25mm Carburized Tapered Drill Rod (09/03/2022)
• Hex.22mm shank 11 degree carburized Tapered Rod Tools (09/03/2022)
• 108mm159mm Shank Hex 22 Hex25 Taperd Drill Rod (09/03/2022)
• 7°11°12° tapered rod for Chisel bit Botton bit short skirt (08/03/2022)
• Tapered rock drilling tools bit (07/03/2022)
• Low Air Pressure dth hammer Ore Mining Rock Drilling 76A dth hammers and button bits (28/12/2021)
• YT27 mini air-leg rock drill (27/12/2021)
• Hot Selling portable pneumatic rock drill YT27 mining mini air leg Hand held Jack Hammer (27/12/2021)
• factory 8 1/2" sealed bearing oil well hard rock tci tricone drill bit (27/12/2021)
• Carbide Low Air Pressure Bit CIR Series Mining Rock Drill Low Air Pressure DTH Hammer button Bits (27/12/2021)
• Factory Prices Y24 Pneumatic Mini Jack Hammer (20/08/2021)
• Coal Mining Cutting Picks (01/07/2021)
• H22 plug hole integral steels rod (26/06/2021)
• 34mm taper button bits (22/03/2021)
• 9 7/8 250mm Rotary Tricone Bit (29/01/2021)
• JL38 cross bit from King Kong Drills (04/01/2021)
• P110-110mm KNSH Russian DTH button bit (11/12/2020)
• T38 thread drill button bit (15/06/2020)